Hydraulic Top Link Cat. 2-2 with Locking Block 19 11/16”-28”with 2 x Hose, G3/8 X 19 Connector, Double-Acting Hydraulic Cylinder, Maximum Working Pressure of 20Mpa

Specifications:Material: SteelColor: BlackProcess: Polishing and WeldingSurface Treatment: PaintingPull Force: 2.5t/5511lbsThrust Force: 3.5t/7716lbsModel: 19 11/16-28''Stroke: 21cm/8.26inBore Diameter: 6.3/7.6cm(2.48/2.99in)Rod Diameter: 3.5cm/1.37inJoint Bearing Width: 6.4cm/2.51inJoint Bearing Thickness: 2cm/0.78inPin Diameter: 2.5cm/0.98inMax. Length: 71cm/27.95inMin. Length: 50cm/19inPort Size: M14*1.5Hydraulic Cylinder Work Pressure Max: 20MpaDouble Pilot Check Valve Port Size: G3/8Double Pilot Check Valve Press Max: 30MpaDouble Pilot Check Valve Flow Max: 12L/minHydraulic Oil Hose Length: 75cm/29.52inHydraulic Oil Hose Port Size: G3/8*19Packing Size: 60*10*10cm/23.62*3.94*3.94inGross Weight: 13kg/28.89lbsApplication: It can be directly mounted on tractors, excavators and Class 1 and 2 equipment and is widely used in waste, recycling, construction, transportation, agriculture, material treatment and other industries.Package Included:1* Double-acting Hydraulic Cylinder2* Hoses2* Banjo Bolts3* Sealing Rings1* Wrench1* Bracket1* English ManualNotes:1. Always check the cleanliness of oil for pollution. Please do not weld on the tube2. Please note that the rod must be lubricated. At the same time, pay attention to protect the rod when cleaning.3. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

• 🚜🚜【𝐓𝐖𝐎-𝐖𝐀𝐘 𝐃𝐄𝐒𝐈𝐆𝐍】Equipped with two-way check valve, can be completed expansion, check valve allows one-way free flow, pressure drop is relatively small, in the opposite direction, it is usually closed, only when the pilot pressure from another oil circuit, the valve can be opened
• 🚜🚜【𝐇𝐘𝐃𝐑𝐀𝐔𝐋𝐈𝐂 𝐋𝐎𝐂𝐊𝐈𝐍𝐆 𝐂𝐇𝐄𝐂𝐊 𝐕𝐀𝐋𝐕𝐄】The hydraulic locking check valve can lock the circuit to prevent the flow of oil in the circuit, so as to ensure that the hydraulic cylinder can maintain its position when there is a certain load outside, so that the operation process is more stable, safe and reliable
• 🚜🚜【𝐒𝐓𝐑𝐎𝐍𝐆 𝐇𝐘𝐃𝐑𝐀𝐔𝐋𝐈𝐂 𝐏𝐎𝐖𝐄𝐑】The double acting hydraulic cylinder can apply linear motion and force through the hydraulic system (maximum working pressure is 20Mpa), and can produce 5070lbs of pull and 7716lbs of thrust without mechanical gears or levers. Therefore, even under heavy loads, it can achieve maximum performance
• 🚜🚜【𝐆𝐎𝐎𝐃 𝐒𝐄𝐀𝐋𝐈𝐍𝐆】Piston adopts high quality five-component tight seal, excellent performance; The piston rod adopts the standard U-cup polyurethane piston rod seal, which is equipped with O-ring, POM-C wear ring and polyurethane dust ring. The sealing performance is excellent, which helps to solve the problems of oil evaporation, air leakage and piston blockage
• 🚜🚜【𝐂𝐎𝐌𝐏𝐋𝐄𝐓𝐄 𝐀𝐂𝐂𝐄𝐒𝐒𝐎𝐑𝐈𝐄𝐒】In addition to the double acting hydraulic cylinder, the package also comes with a hose, connector bolts, sealing rings and wrenches for easy use and installation without the need for additional configuration and purchase. Hose made of rubber and steel wire, with good toughness and oil resistance, long-term use is not easy to crack, equipped with G3/8 * 19 connector, convenient for you to directly use and install; A removable bracket is included in the package to provide secure support